Installation Standards For Frame Scaffolding
Installation standards: Portal scaffolding has its own standards for installation, which must be neat and uniform,Frame Scaffolding and have a stable support system in two mutually perpendicular directions. Before erecting,Frame Scaffolding it must be strictly laid out in accordance with the design requirements. During the installation of the mast support,Frame Scaffolding it is required to add a 48 x 3.5 steel pipe horizontal pull rod to buckle each level of mast installed. Vertical and horizontal vertical scissor supports are arranged at a distance of less than 6m. The supporting force of portal steel scaffolding mainly depends on the overall force of the supporting frame. To exert this overall effect,Frame Scaffolding it is necessary to "bundle" the thin portal frames by horizontal and vertical horizontal pull rods and vertical and horizontal vertical scissor braces.
If the vertical and horizontal horizontal pull rods and vertical and horizontal vertical scissor supports are not provided,Frame Scaffolding it is as easy to break as chopsticks,Frame Scaffolding and the door frame support is extremely easy to collapse. This situation must be eliminated. The extension length of the adjusting bolt of the adjustable bracket (base) should not be greater than 200 mm. When the extension length of the bolt of the adjustable bracket (including the base) is greater than 200 mm,Frame Scaffolding a horizontal tie rod can be added to fix it. Many operators do not understand this. They screw out the bolts for a long time and do not take measures to reinforce them,Frame Scaffolding which greatly reduces the force of the mast and often leads to collapse accidents.

