Key Points For Installation Of Residential Container Houses

Regarding the reuse of waste containers, many of them are used in temporary office spaces. We often encounter the installation of second-hand container mobile homes at construction sites or other temporary use places. Construction is convenient and fast, but many people don't know what the key points of installation are. Below is a detailed answer.
1. Carry out maintenance work
Second-hand containers will inevitably have some damage or holes. Maintenance work should be done in advance. The steel structure should be well-painted, rust-removed, and holes repaired. Anti-corrosion treatment needs to be carried out in a highly corrosive environment. There should be no water or debris around the place. smooth.
2. Fire and windproof
Fire prevention treatment should be done well. The fire prevention distance should meet the requirements of the design specifications. The fire exits should be smooth. The fire extinguishing equipment should be complete and meet the design requirements. The layout should be reasonable. Effective measures should be taken in kitchens and other places. The oxygen index of metal sandwich panels should not be less than 32, wooden floors, etc. Combustible materials should be fireproofed.
3. Lay the circuit well to prevent leakage
The mobile home will use electrical appliances and lay circuits in advance. The electrical lines use PVC pipes. The layout is neat and beautiful. The electrical configuration meets the requirements. The lines have no insulation aging and the interfaces are in good condition.
4. Place it flatly
Although temporary mobile homes do not require a foundation, the ground must be flat when placed, cleaned in advance, and then installed smoothly. The eaves must be straight and the overlapping directions of the boards must be correct and consistent.
5. The equipment is in good condition and there is no loss during construction.
The enclosure panels (roof panels, wall panels) of the prefab house have no obvious deformation or damage; the fixing bolts, waterproof washers, metal washers, and nylon casings are complete, and the connections are reliable; the sealant is complete and effective.
6. Lightning protection design
The lightning protection grounding settings meet the design and specification requirements; the grounding resistance should be qualified. Since second-hand mobile homes are made of metal, wood or solar panels can be laid on the top.