The Characteristics Of Flat Bar Compared With Traditional Steel

Compared with traditional steel plates, flat bar the product specifications are special. The thickness is 8-50mm, the width is 150-625mm, the length is 5-15m, and the product specifications are relatively dense, flat bar which can meet the needs of users. It can be used instead of the middle plate and can be directly welded without cutting. Smooth and clean product surface. The high-pressure water descaling process is used twice in the process to ensure the smooth surface of the steel. The sides are vertical and the water chestnuts are clear. The second vertical rolling in the finishing rolling ensures good verticality on both sides, flat bar clear corners and good surface quality on the sides.

The scale of the product is accurate, three-point difference, flat bar the same level difference is better than the steel plate standard; the product is straight and the plate shape is good. The finishing rolling adopts continuous rolling technology, automatic looper automatic control, flat bar to ensure that no steel is piled or stretched, the product size is high, the tolerance range, three-point difference, same stripe,flat bar sickle bend and other parameters are better than the medium plate, and the plate shape is straight Degree is good. Cold shearing, flat bar high precision of length setting. The product material adopts national standards, flat bar which is the same as steel plate. The quality technical standards are organized according to YB/T4212-2010 standards (Q345B/Q235B refer to GB/T1591-94 and GB/T700-06 standards respectively)